Order Products : sales@su-jiao.com
polyvic® IM-1208-GL 06
| Category: | PVC, Semi-Rigid , Semi-Rigid Polyvinyl Chloride |
| Manufacturer: | Unipack Plasindo |
| Trademark: | polyvic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tKh6u3_polyvic-IM-1208-GL-06.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PVC Compound Semi Rigid IM-1208-GL 06, high clarity with little bit bluish, designed for injection products. Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 17 | ASTM D785 | |
| Durometer Hardness (Shore D) | 74 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 30.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 160 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 5.65 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 40.5 | °C | ASTM D648 |
| Vicat Softening Temperature | 66.2 | °C | ASTM D256 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 4.3 | mm/min | ASTM D635 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 88.1 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 145 - 150 | °C | |
| Middle Temperature | 150 - 155 | °C | |
| Front Temperature | 155 - 160 | °C | |
| Nozzle Temperature | 165 - 170 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.500 - 0.800 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| Injection instructions |
|---|
| Die pin temperature : 170—175°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VICTREX® PAEK WG™ 101 | Victrex plc | PAEK | VICTREX® PAEK |
| Ad-Tech Polyester NO. 22 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Gallonprene® GP310-9001 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| MAJORIS DFR160 | AD majoris | PP Copolymer | MAJORIS |
| Medalist® MD-53293 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist™ |
