Order Products : sales@su-jiao.com

NuSil R-2637

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tGARcR_NuSil-R-2637.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: 0.006 ohm-cm

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

Comment: 0.006 ohm-cm

General Information
Features	Electrically Conductive Fuel Resistant
Uses	Aircraft Applications Electrical/Electronic Applications

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 20
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Tan
Density	3.59	g/cm³
Curing Time (150°C)	0.50	hr
Pot Life	240	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	60
Tensile Strength	1.45	MPa
Tensile Elongation at Break	280	%
Electric Strength	0.20	kV/mm

Resin Grade	Manufacturer	Category	Trademark
Prime Tuff-X 200 HG	Primex Plastics Corporation	Unspecified	Prime Tuff-X
S&E General Purpose G-4275E	S&E Specialty Polymers, LLC	PVC, Unspecified	S&E General Purpose
Aegis® H135MP	Honeywell	Nylon 6	Aegis®
Flexalloy® 9400-60	Teknor Apex Company	PVC Elastomer	Flexalloy®
K-Resin® SBC XK44	Chevron Phillips Chemical Company LLC	SBC	K-Resin® SBC