Order Products : sales@su-jiao.com
Badamid® UL C70 GF20 FR
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tG30bv_Badamid-UL-C70-GF20-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Badamid®UL C70 GF20 FR is a polyamide 66/6 copolymer (nylon 66/6) material, which contains a 20% glass fiber reinforced material. This product is available in Europe,. Badamid®The main characteristics of UL C70 GF20 FR are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.50 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 4.6 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 1.7 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 8500 | 6500 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 130 | 100 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 2.5 | 3.5 | % | ISO 527-2/5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 10 | 11 | kJ/m² | ISO 179/1eA |
| 23°C | 11 | 13 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 55 | 60 | kJ/m² | ISO 179/1eU |
| 23°C | 60 | 75 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | ISO 180/1A | |||
| -30°C | 8.0 | 8.0 | kJ/m² | ISO 180/1A |
| 23°C | 9.0 | 12 | kJ/m² | ISO 180/1A |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature 1 | ||||
| 0.45 MPa, not annealed | 230 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 215 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 243 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Dielectric Constant (1 MHz) | 3.60 | 5.20 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.016 | 0.16 | IEC 60250 | |
| Comparative Tracking Index | 375 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Short-Term Heat Resistance, IEC 216, 20000 hrs: 190°CLong-Term Heat Resistance, IEC 216, 50% decrease of yield stress: 100°C |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 270 - 290 | °C | |
| Mold Temperature | 70.0 - 90.0 | °C |
| Note Message | |
|---|---|
| 1 . | 110x10x4mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 LF L UV | RTP Company | PC | RTP |
| AR® 1 | Greene, Tweed & Co. | TP, Unspecified | AR® |
| Celcon® GC15 | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| Edgetek™ ET3500-5003 | PolyOne Corporation | ASA+PC | Edgetek™ |
| LNP™ THERMOCOMP™ EC006PXQ compound | SABIC Innovative Plastics | PEI | LNP™ THERMOCOMP™ |
