Order Products : sales@su-jiao.com

Cytec VTF261

Category:	Adhesive , Adhesive
Manufacturer:	Cytec Industries Inc.
Trademark:	Cytec
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tEBQt7_Cytec-VTF261.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VTF261 surfacing materials are based on Cytec's 'ZPREG®' selective impregnation surfacing technology and are recommended for use with the VTM®260 Series rapid lay-up prepregs and ZPREG materials. VTF261 surfacing materials are capable of achieving high quality cosmetic finish or paint ready surfaces direct from the mould. In common with all VTM260 Series materials, VTF261 can be cured under vacuum bag pressure at temperatures between 65°C and 120°C (149°F and 248°F). The maximum end use service temperature is 100°C (212°F) after post- cure. Differentially coated prepreg formats are recommended for relatively thin components where a clear cosmetic finish is required. ZPREG formats are recommended for large or thick components where flaw-free paintable surfaces may be achieved from standard tooling.

Message

VTF261 surfacing materials are based on Cytec's 'ZPREG®' selective impregnation surfacing technology and are recommended for use with the VTM®260 Series rapid lay-up prepregs and ZPREG materials. VTF261 surfacing materials are capable of achieving high quality cosmetic finish or paint ready surfaces direct from the mould.

In common with all VTM260 Series materials, VTF261 can be cured under vacuum bag pressure at temperatures between 65°C and 120°C (149°F and 248°F). The maximum end use service temperature is 100°C (212°F) after post- cure.

Differentially coated prepreg formats are recommended for relatively thin components where a clear cosmetic finish is required. ZPREG formats are recommended for large or thick components where flaw-free paintable surfaces may be achieved from standard tooling.

General Information
Filler / Reinforcement	Carbon Fiber Glass Fiber
Features	Good Surface Finish Heat Cure Paintable
Uses	Adhesives Coating Applications
Forms	Fabric
Processing Method	Vacuum Forming

Resin Grade	Manufacturer	Category	Trademark
Tecnoprene® A60K6F NAT005	SO.F.TER. SPA	PP Homopolymer	Tecnoprene®
BJB Polyurethane WC-748 A/B	BJB Enterprises, Inc.	TSU	BJB Polyurethane
Flexathene® PD907	LyondellBasell Industries	Polyolefin, Unspecified	Flexathene®
HiFill® PA4/6 GF5 IM HS BK	Techmer Engineered Solutions	Nylon 46	HiFill®
Hyundai EP PA6 LS140	HYUNDAI EP Co., Ltd.	Nylon 6	Hyundai EP PA6