Order Products : sales@su-jiao.com
KRATON® D1116 B
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tCugmV_KRATON-D1116-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1116 B is a clear, radial triblock copolymer based on styrene and butadiene, with a polystyrene content of 23%. It is supplied from South America in the physical form identified below.
Kraton D1116 B is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | |
| Antioxidant Additive 1 | 0.15 to 0.40 | % | Internal Method |
| Ash Content - BT, Talc | 0.15 to 0.35 | % | ISO 247 |
| Polystyrene Content | 21 to 24 | % | Internal Method |
| Solution Viscosity - (Toluene) 20%wt (25°C) | 2.0 to 3.0 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.70 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 16.0 | ||
| Styrene/Rubber ratio | 23/77 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 63 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 2.40 | MPa | ISO 37 |
| Tensile Strength 3(Yield) | 32.0 | MPa | ISO 37 |
| Tensile Elongation 4(Break) | 900 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Typical properties determined on film cast from toluene solution |
| 3 . | Typical properties determined on film cast from toluene solution |
| 4 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA66 ST801HSL BK | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Prime Micro X | Primex Plastics Corporation | SMA | Prime Micro |
| Salflex 620TIC | Salflex Polymers Ltd. | PP Copolymer | Salflex |
| Epoxies, Ect. 50-1225 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
| POLYfill PPH TS15030 | Polykemi AB | PP Homopolymer | POLYfill |
