Order Products : sales@su-jiao.com
THERMORUN® 3981B/N
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | THERMORUN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t9HNsN_THERMORUN-3981B-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| THERMORUN®3981B/N is a thermoplastic elastomer (TPE) material,. This product is available in North America, Europe or Asia Pacific. The processing method is extrusion or injection molding. THERMORUN®The main characteristics of 3981B/N are: low hardness. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 18 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 1.5 - 2.0 | % | ISO 294-4 |
| Flow direction | 1.5 - 2.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ISO 868 | ||
| Shaw A | 90 | ISO 868 | |
| Shaw D | 40 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 5.60 | MPa | ISO 37 |
| 300% strain | 6.90 | MPa | ISO 37 |
| Tensile Stress (Break) | 13.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 740 | % | ISO 37 |
| Tear Strength | 66 | kN/m | ISO 34-1 |
| Compression Set (70°C, 22 hr) | 54 | % | ISO 815 |
| Additional Information |
|---|
| Data obtained using JIS test methods. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PC-UV4 | Polymer Resources Ltd. | PC | PRL |
| YUPLENE® HX3900 | SK Global Chemical | PP Homopolymer | YUPLENE® |
| AMPAL® MPV 2000 | RASCHIG GmbH | Polyester, TS | AMPAL® |
| PCC HD 6070 UA | PCC Plastics & Consultations Center | HDPE | PCC |
| LNP™ LUBRICOMP™ DFL34 compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
