Order Products : sales@su-jiao.com

EMAC+® SP1305

Category:	EMA , Ethylene Methyl Acrylate Copolymer
Manufacturer:	Westlake Chemical Corporation
Trademark:	EMAC+®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	t93vGt_EMAC-SP1305.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EMAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. For use as heat seal layer, adhesive layer, or modifier for cost/performance enhancement. They are soft, pliable and tough at ambient and freezing temperatures and exhibit excellent ESCR. These polymers exhibit high solids fillability and compatibility with a wide range of polymers. This facilitates their uses as bases for all-purpose concentrates for addition to a wide spectrum of polymers. EMAC resins process like LDPE. EMAC+ Specialty Copolymers are produced under patented technology: US Patent 5804675.

Message

EMAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. For use as heat seal layer, adhesive layer, or modifier for cost/performance enhancement. They are soft, pliable and tough at ambient and freezing temperatures and exhibit excellent ESCR. These polymers exhibit high solids fillability and compatibility with a wide range of polymers. This facilitates their uses as bases for all-purpose concentrates for addition to a wide spectrum of polymers. EMAC resins process like LDPE. EMAC+ Specialty Copolymers are produced under patented technology: US Patent 5804675.

General Information
Features	Good Adhesion Good Flexibility Good Heat Seal Good Toughness High ESCR (Stress Crack Resist.) Soft
Uses	Film Tie-Layer

Physical	Nominal Value	Unit	Test Method
Density	0.942	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238
Methyl Acrylate Content	20.0	wt%

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	37		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Break)	11.0	MPa	ASTM D638
Tensile Elongation ²(Break)	820	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -73.0	°C	ASTM D746
Vicat Softening Temperature	50.0	°C	ASTM D1525
Peak Melting Temperature	96.0	°C	ASTM D3418

Note Message
1 .	Type IV, 500 mm/min
2 .	Type IV, 500 mm/min

Resin Grade	Manufacturer	Category	Trademark
Thermec™ 4150CF40	Technical Polymers, LLC	PPS	Thermec™
Addisil™ 440 E	Momentive Performance Materials Inc.	Rubber	Addisil™
GLS PP YN06 HF	GLS Polymers Pvt. Ltd.	PP, Unspecified	GLS PP
INLUBE POMHTF20	Infinity LTL Engineered Compounds	Acetal (POM) Homopolymer	INLUBE
POLYCOMPO PP J139	POLYCOMPO Co.,Ltd.	PP, Unspecified	POLYCOMPO PP