Order Products : sales@su-jiao.com
Nymax™ NM6000-0001 RS IM Nat
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Nymax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t8EFVx_NymaxNM60000001RSIMNat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nymax®The mineral reinforced nylon 6 composite material of 600 series products has ideal physical properties, durability, and surface appearance has also been improved. These materials are easy to process in standard thermoplastic processing equipment. |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 75.8 | MPa | ASTM D638 |
| Flexural Modulus 2 | 4120 | MPa | ASTM D790 |
| Flexural Strength 3 | 121 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 96 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 - 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 240 - 288 | °C | |
| Middle Temperature | 240 - 288 | °C | |
| Front Temperature | 240 - 288 | °C | |
| Mold Temperature | 70 - 90 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 13 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP VLF 82309 A | RTP Company | PUR, Unspecified | RTP |
| Chemlon® 140 M | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| EVAL™ E105B | EVAL Europe nv | EVOH | EVAL™ |
| Estane® 58130 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| HOPELEX PC-1220U | Lotte Chemical Corporation | PC | HOPELEX |
