Order Products : sales@su-jiao.com
KRATON® G1650 M
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t666I1_KRATON-G1650-M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below.
Kraton G1650 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D4025 |
| Apparent Density | 0.22 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | < 1.0 | g/10 min | ASTM D1238 |
| Antioxidant Additive 1 | 0.030 to 0.10 | % | Internal Method |
| Polystyrene Content | 29 to 32 | % | Internal Method |
| Solution Viscosity - Toluene, 25%wt (25°C) | 1.1 to 1.9 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Styrene/Rubber ratio | 30/70 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 72 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 5.52 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 34.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1385 C AR 10 TFE 15 | RTP Company | PPS | RTP |
| Chemlon® 109-14 G | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| Elastron® G G101.A73.B | Elastron USA, Inc. | SEBS | Elastron® G |
| LAMIGAMID® 307 | Schwartz Technical Plastic | Nylon 6 | LAMIGAMID® |
| KEBATER® PBT BF120 | BARLOG plastics GmbH | PBT | KEBATER® |
