Order Products : sales@su-jiao.com
SEETEC LLDPE UF313
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | SEETEC LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t5Mo1b_SEETEC-LLDPE-UF313.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UF313 is manufactured by Unipol process technology. UF313 has good mechanical properties, excellent optical properties and good processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.1 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 40 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 43.1 | MPa | |
| TD : Break, 40 µm, Blown Film | 39.2 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 730 | % | |
| TD : Break, 40 µm, Blown Film | 750 | % | |
| Dart Drop Impact (40 µm, Blown Film) | 150 | g | ASTM D1709 |
| Elmendorf Tear Strength 1 | ASTM D1922 | ||
| MD : 40.0 µm | 49.0 | kN/m | |
| TD : 40.0 µm | 98.1 | kN/m |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 40.0 µm, Blown Film) | 74 | ASTM D2457 | |
| Haze (40.0 µm, Blown Film) | 11 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Colorite G Series 7811G-015 | Colorite Polymers | PVC, Flexible | Colorite G Series |
| Flextuff® 2808 | Noble Polymers | TPE | Flextuff® |
| POLYfill PPHC GF3020 PB7 | Polykemi AB | PP, Unspecified | POLYfill |
| ESTOPLAST EP 5010BB12 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| COPEC® CC7FDN (Series: VS/CR/AD1) | KRAIBURG TPE | TPE | COPEC® |
