Order Products : sales@su-jiao.com
Boltaron 9815E
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Boltaron Performance Products |
| Trademark: | Boltaron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t4tzGg_Boltaron-9815E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FAR Rated High Impact Sheet Greater impact resistance than competitive 65/65-rated PVC/Acrylic sheets, inclusion-free quality and unlimited textures/colors Boltaron 9815E is a proprietary, fire retardant, extruded PVC/Acrylic alloy for aircraft interior components that meets stringent FAA requirements for flammability, smoke generation and heat release while exhibiting exceptional physical properties. It offers Izod Impact resistance of 5.0 ft lbs/in (265 J/m) - higher than competitive 65/65- compliant sheets rated at 3.0 ft lbs/in (159 J/m)—significantly improving the durability of thermoformed aircraft interior components. It also offers other exceptional physical properties, extreme formability and consistent surface quality, and is available in an unlimited range of colors and textures. As a result, Boltaron 9815E is specified by the world's leading commercial, military and private aircraft and helicopter manufacturers, carriers and interior refurbishing contractors, for thermoformed, fabricated and machined interior components of unequalled durability and appearance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 107 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 37.9 | MPa | ASTM D638 |
| Flexural Modulus | 2830 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 60.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 270 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed) | 76.7 | °C | ASTM D648 |
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability | Pass All | FAR 25.853 | |
| Heat Release | FAR 25.853 | ||
| -- 1 | < 65 | kW/m² | |
| -- 2 | < 65 | kW·min/m² | |
| NBS Smoke Density | ASTM F814 | ||
| Ds @ 1.5 Min | < 100 | ||
| Ds @ 4 Min | < 200 |
| Note Message | |
|---|---|
| 1 . | Peak - Hrr |
| 2 . | 2 Min - Hrr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XYRON™ 540Z | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| Alpha PVC GM 5075 NATURAL | AlphaGary | PVC, Unspecified | Alpha PVC |
| GAPEX® HPP35GR08BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| HiFill® PA6 IM L N | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| MAXAMID™ EPDM6G14-BK | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
