Order Products : sales@su-jiao.com
Moplen H30G
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Shazand (Arak) Petrochemical Corporation |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t40EVg_Moplen-H30G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen H30G is a very high flow polypropylene homo-polymer with very narrow molecular weight distribution suitable for short cycle injection moulding and extrusion coating applications. Moplen H30G combines high stiffness with good transparency and good adhesion. Typical applications are injection moulding applications such as household articles, toys. It is also well suited for high speed coating of paper coating and thin-walled packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 36.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 10 | % | ASTM D638 |
| Flexural Modulus | 1600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 29 | J/m | ASTM D256 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oven Aging (150°C) | 15.0 | day | ASTM D3012 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Vicat Softening Temperature | 154 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4001 TFE 15 SI 2 | RTP Company | PPA | RTP |
| Tefzel® HT-2181 | DuPont Fluoropolymers | ETFE | Tefzel® |
| VisiJet® FTI Blue | 3D Systems | Unspecified | VisiJet® |
| ALTECH® PA6 TG 2015/717 GF15 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| GERMAMID 6 GF 20 | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
