Order Products : sales@su-jiao.com
Shinko-Lac® ASA TA-20S
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t2gh4S_Shinko-Lac-ASA-TA-20S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac®ASA TA-20S is an acrylonitrile-styrene-acrylate PC (ASA PC) material,. This product is available in North America and is processed by injection molding. Shinko-Lac®The main characteristics of ASA TA-20S are: impact resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 52.0 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2210 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 68.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 590 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 6.35mm, injection molding | 130 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.35mm, injection molding | 107 | °C | ASTM D648 |
| Additional Information |
|---|
| Spiral Flow Length, MRC Test, 2t, 240°C, 1000 kg: 310 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4005 FR A | RTP Company | PPA | RTP |
| Witcom PA12 2010/039 | Witcom Engineering Plastics B.V. | Nylon 12 | Witcom PA12 |
| AMPLIFY™ GR 388 | The Dow Chemical Company | MAH-g | AMPLIFY™ GR |
| LUVOCOM® 19-7319 | Lehmann & Voss & Co. | Nylon 46 | LUVOCOM® |
| POLYfill PP HIP8040F VT2 | Polykemi AB | PP, Unspecified | POLYfill |
