Order Products : sales@su-jiao.com
RTP 782
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t2MH5o_RTP-782.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.25 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 4130 | MPa | ASTM D638 |
| Tensile Strength | 39.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 3240 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 54.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 75 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 260 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+3 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 to 227 | °C | |
| Middle Temperature | 177 to 227 | °C | |
| Front Temperature | 177 to 227 | °C | |
| Mold Temperature | 21.0 to 66.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® A9810 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Tecomid® NA40 NL IM | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Wah Hong DAP WH-9100- BLK F | Wah Hong Industrial Corp. | DAP | Wah Hong DAP |
| Ultraform® N 2640 E4 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| PLUSTEK PB300G3 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
