Order Products : sales@su-jiao.com
TEKNIFLEX® PTATP22002
| Category: | Film, PE/PCTFE , PE/PCTFE Film |
| Manufacturer: | Tekni-Films, a div of Tekni-Plex |
| Trademark: | TEKNIFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sya3p4_TEKNIFLEX-PTATP22002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A pharmaceutical-grade PE/PCTFE flexible film, unconventionally bonded, is specially developed to contain demanding liquids. The film is a high barrier, transparent, radiation sterilization stable, non-yellowing, thermoformable and EP- and FDA-compliant film. The product contact layer is a polyethylene without additives for containers for parenteral and ophtalmic preparations, with a low extractables profile. PCTFE offers the high barrier to moisture and to aromatic and aliphatic hydrocarbon species and excipients. The construction does not absorb excipients. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | |
| Dimensional Stability 1 | |||
| Across Flow, 140°C | -4.0 | % | |
| Flow, 140°C | 4.0 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Coefficient of Friction 2 | 0.60 |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Film Thickness 3 | 151 | µm | |
| Yield | 4.93 | m²/kg |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Roll Width 4 | < 110.00 | cm | |
| Thermoforming Molding Temperature | 105 to 120 | °C |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | |||
| MD : Yield | 18.0 | MPa | |
| TD : Yield | 15.0 | MPa | |
| Oxygen Transmission Rate 5(23°C, 90% RH) | 62 | cm³/m²/24 hr | |
| Water Vapor Transmission Rate (38°C, 90% RH) | 0.14 | g/m²/24 hr |
| Optical | Nominal Value | Unit | |
|---|---|---|---|
| Transmittance (450 nm) | > 90.0 | % |
| Note Message | |
|---|---|
| 1 . | 10 minutes |
| 2 . | Mat Finish |
| 3 . | Thickness tolerance: ±10% |
| 4 . | Roll width tolerance: ±1.5 mm |
| 5 . | 100% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Akulon® SG-KGS6 | DSM Engineering Plastics | Nylon 66 | Akulon® |
| Akulon® K224-G6 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Di-Pak™ R-4260 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| GECET™ F-100 | Fagerdala USA Inc. | PS (EPS) | GECET™ |
| Plaslube® PEEK CF15 TL15 A HF | Techmer Engineered Solutions | PEEK | Plaslube® |
