Order Products : sales@su-jiao.com
Lupolen 1800 U
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Lupolen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | syVIkA_Lupolen-1800-U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lupolen 1800 U is a low density polyethylene (LDPE) resin used in various processing methods such as injection molding and compounding. It exhibits very high flowability and a very good balance of softness and toughness, dimensional stability and good processing. Lupolen 1800 U is delivered in pellet form and is not additivated. It is used in a wide range of injection molding applications such as thin-wall packaging (TWIM) and housewares. Lupolen 1800 U is also used in the area of compounding for color and additive batches and as a viscosity modifier. Customers have reported that the high melt flow rate (MFR) of Lupolen 1800 U enables very good dispersion and homogenization at high loads with pigments and additives. Lupolen 1800 U is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 65 | g/10 min | ISO 1133 |
| Spiral Flow | 100 | cm | Internal Method |
| Environmental Stress-Cracking Resistance 1 | 1.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 45 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 180 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 8.00 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 85 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 75.0 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 105 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in 10% nonionic surfactants |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starpylen HU 70E4 ECR | Eurostar Engineering Plastics | PP Homopolymer | Starpylen |
| Vistalon™ 703 | ExxonMobil Chemical | EPM | Vistalon™ |
| ALTECH® PA6 A 4012/500 MR12 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Cardia Biohybrid™ H-M01 | Cardia Bioplastics™ | TPS+PE | Cardia Biohybrid™ |
| INSULCAST® 136/INSULCURE 11B | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
