TECHNYL® C 218 MZ20 V10 BLACK Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 218 MZ20 V10 Black is a polyamide 6, reinforced 20 % mineral filler and 10 % of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent planarity of the end product, good mechanical properties and a high dimensional stability.

General Information
Filler / Reinforcement	Glass \mineral, 30% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Good dimensional stability Low warpage Rigid, good
Uses	Application in Automobile Field
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA6-MD20+GF10

Physical	Dry	Conditioned	Unit	Test Method
Density	1.36	--	g/cm³	ISO 1183/A

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	7400	4500	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	100	60.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	3.3	--	%	ISO 527-2
Flexural Modulus (23°C)	9300	--	MPa	ISO 178
Flexural Stress (23°C)	255	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	14	10	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	60	85	kJ/m²	ISO 179/1eU
Notched Izod Impact (23°C)	15	--	kJ/m²	ISO 180
Unnotched Izod Impact Strength (23°C)	82	--	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	205	--	°C	ISO 75-2/Af
Melting Temperature	222	--	°C	ISO 11357-3

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	230 - 235	°C
Middle Temperature	235 - 240	°C
Front Temperature	240 - 250	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sxM2ge_TECHNYLC218MZ20V10BLACK.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Andur 8-5 APLF	Anderson Development Company	PUR-Ester/TDI	Andur
ASTALOY™ PC/ABS MDA216	Marplex Australia Pty. Ltd.	PC+ABS	ASTALOY™
HIDEN® F600	YUHWA Korea Petrochemical Ind. Co., Ltd.	HDPE	HIDEN®
Sylvin 6240-80 Yellow 4191	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Marlex® TRB-432	Chevron Phillips Chemical Company LLC	HDPE	Marlex®