Order Products : sales@su-jiao.com

Elvax® 3120

Category:	EVA , Ethylene Vinyl Acetate Copolymer
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	Elvax®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	swT3Ff_Elvax-3120.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Elvax® 3120 is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. Composition 7.5 % By Weight Vinyl Acetate comonomer content Slip additive, Antiblock additive. Thermal Stabilizer: BHT antioxidant. Applications This resin is designed to provide a low temperature heat seal to itself or many other materials commonly used in flexible packaging applications. The melt properties of this resin allow it to be processed on blown film equipment over a wide range of film thickness and blow-up ratios. It can also be co-extruded with a variety of other polymers. This resin is typically used as low temperature seal layer in co-extruded films.

Message

Elvax® 3120 is an extrudable ethylene-vinyl acetate copolymer resin available in pellet form for use in conventional extrusion equipment designed to process polyethylene resins.

Composition

7.5 % By Weight Vinyl Acetate comonomer content

Slip additive, Antiblock additive.

Thermal Stabilizer: BHT antioxidant.

Applications

This resin is designed to provide a low temperature heat seal to itself or many other materials commonly used in flexible packaging applications. The melt properties of this resin allow it to be processed on blown film equipment over a wide range of film thickness and blow-up ratios. It can also be co-extruded with a variety of other polymers. This resin is typically used as low temperature seal layer in co-extruded films.

General Information
Additive	Antiblock Antioxidant Heat Stabilizer Slip
Features	Antiblocking Antioxidant Copolymer Food Contact Acceptable Good Flexibility Good Heat Seal Heat Stabilized Low Temperature Heat Sealability Slip
Uses	Film Packaging
Agency Ratings	FDA 21 CFR 177.1350(a)(1)
Forms	Pellets
Processing Method	Blown Film Coextruded Film Coextrusion Film Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.930	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.2	g/10 min	ASTM D1238, ISO 1133
Vinyl Acetate Content	7.5	wt%

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	84.0	°C	ASTM D1525, ISO 306
Peak Melting Temperature	99.0	°C	ASTM D3418, ISO 3146
Freezing Point ¹
--	82	°C	ISO 3146
--	82	°C	ASTM D3418

Extrusion	Nominal Value	Unit
Melt Temperature	< 230	°C

Note Message
1 .	DSC

Resin Grade	Manufacturer	Category	Trademark
ASTALAC™ ABS M190	Marplex Australia Pty. Ltd.	ABS	ASTALAC™
Clariant Nylon 6/6 PA-111G20	Clariant Corporation	Nylon 66	Clariant Nylon 6/6
Eltex® B4922/20N3000	INEOS Olefins & Polymers Europe	HDPE	Eltex®
KOPLA PP KPG1040	KOPLA Co., Ltd.	PP, Unspecified	KOPLA PP
Durethan® AKV 30 000000	LANXESS GmbH	Nylon 66	Durethan®