TECHNYL STAR® S 218L1 V30 BLACK 1N Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL STAR® S 218L1 V30 Black is based on a patented high flow polyamide 6 resin (TechnylStar),heat stabilized, UV stabilized, reinforced with 30% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 30% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Good dimensional stability Excellent appearance Good UV resistance High liquidity Good demoulding performance
Uses	Handle Furniture Application in Automobile Field
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA6-GF30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.34	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	0.95	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	10500	6200	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	180	110	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	3.2	--	%	ISO 527-2
Flexural Modulus (23°C)	9500	5200	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	10	12	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	50	65	kJ/m²	ISO 179/1eU
Notched Izod Impact (23°C)	10	12	kJ/m²	ISO 180
Unnotched Izod Impact Strength (23°C)	50	60	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Melting Temperature	222	--	°C	ISO 11357-3

Flammability	Dry	Conditioned	Unit	Test Method
Glow Wire Flammability Index (1.6 mm)	650	--	°C	IEC 60695-2-12

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	230 - 235	°C
Middle Temperature	235 - 240	°C
Front Temperature	240 - 245	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL STAR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sv7QTm_TECHNYLSTARS218L1V30BLACK1N.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
PRIMATOP PP HOMO 350NA	Amco Polymers	PP Homopolymer	PRIMATOP
Tectron H2299	TECTRON Systems Pte Ltd	TPV	Tectron
Jiangsu Sinarise JM9113	Jiangsu Sinarise New Material Technology Co., Ltd	TPE	Jiangsu Sinarise
Pemex PX 20020 X	Pemex Petroquímica	LDPE	Pemex
Sylvin 9762-66 Orange 5122	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin