Order Products : sales@su-jiao.com
RTP 2999 X 125934 A NS
| Category: | PEBA-Ester , Polyester Block Amide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | snuOZc_RTP-2999-X-125934-A-NS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BARIUM SULFATE FILLED |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.20 to 0.40 | % | ASTM D955 |
| Moisture Content | < 0.40 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 25 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 3.79 | MPa | ASTM D412 |
| Tensile Strength 2(Break, 3.20 mm) | 16.5 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 1000 | % | ASTM D412 |
| Tear Strength 4 | 61.3 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 55.0 to 65.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Processing (Melt) Temp | 180 to 240 | °C | |
| Mold Temperature | 10.0 to 30.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C, 510 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vipel® F701-FHG-00 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| WanBlend® WHT-890E5 | Wanhua Chemical Group Co., Ltd. | TPU-Polyether | WanBlend® |
| Bayfill® EA 2204 | Covestro - PUR | PUR-Ether/MDI | Bayfill® |
| EPITEC® PC-910FH | Osterman & Company | PC | EPITEC® |
| Kepital® F10-03H | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
