Order Products : sales@su-jiao.com
Nypol® PA A3 G30 HS UV RH AMLA144 NR450 MSP
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Nypol® PA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | skYcni_Nypol-PA-A3-G30-HS-UV-RH-AMLA144-NR450-MSP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyamide 6.6 with 30% glass fiber in yellow RAL 1023 as QK003000 QK3013H type, heat stabilizers, UV resistant and resistant to hydrolysis. Good set of thermal properties, electrical and mechanical. Ideal for injection molding. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.34 to 1.38 | -- | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | |||
| Saturation | 6.0 | -- | % | |
| Equilibrium | 1.9 | -- | % | |
| Ash Content | 27 to 33 | -- | % | ASTM D2584 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 8600 | 6600 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | |||
| Break | 143 | 121 | MPa | |
| -- | 200 | 135 | MPa | |
| Tensile Elongation (Break) | 3.2 | 5.0 | % | ASTM D638 |
| Flexural Modulus | 12200 | 6500 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Unnotched Izod Impact (Area) | ASTM D256 | |||
| -30°C | 47.0 | 50.0 | kJ/m² | |
| 23°C | 55.0 | 60.0 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 260 | -- | °C | |
| 1.8 MPa, Unannealed | 250 | -- | °C | |
| Melting Temperature | 250 to 265 | -- | °C | ASTM D2117 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 270 to 285 | °C | |
| Mold Temperature | 80.0 to 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NB40 GR15 NL XA70 | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| Tecnoflon® PL 557 | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| Nymax™ X GMF 604 40 UV Black 148 rev 4 | PolyOne Corporation | Nylon 6 | Nymax™ |
| Magnobond 99 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Sumikon® EM-TX235 | SBHPP | Epoxy | Sumikon® |
