Order Products : sales@su-jiao.com
HiPrene® MR71SE
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | GS Caltex |
| Trademark: | HiPrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | shryTG_HiPrene-MR71SE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HiPrene® MR71SE is a high melt flow, 15% mineral filled polypropylene compound. This product has excellent UV and scratch resistance. The grade has been specifically designed for moulding large complex parts that require high impact strength as well as good stiffness. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) 1 | 40 | g/10 min | ISO 1133 |
| Ash Content (600°C) | 15 | % | ISO 3451-1A |
| Volatile Matter | 0.12 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 15.0 | MPa | ISO 527-2/1A/50 |
| Nominal Tensile Strain at Break | 25 | % | ISO 527-2/1A/50 |
| Flexural Modulus | 1300 | MPa | ISO 178/B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 35 | kJ/m² | ISO 180/A |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Small Boss RPVC01 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | PVC, Rigid | Small Boss |
| NuSil CV-2961 | NuSil Technology | Silicone | NuSil |
| Ajedium™ Films -- AvaSpire® AV-630 | Solvay Specialty Polymers | PAEK | Ajedium™ Films |
| Hyundai EP PA6 LS400 | HYUNDAI EP Co., Ltd. | Nylon 6 | Hyundai EP PA6 |
| Sylvin 5104 Red 6279 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
