Order Products : sales@su-jiao.com
Paxon™ 7000 XL Series
| Category: | HDPE, UHMW , High Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Paxon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sfVI5q_Paxon-7000-XL-Series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Paxon™7000 series cross-linked metallocene high density polyethylene resin has excellent environmental stress cracking resistance, toughness, heat resistance, impact resistance and notch failure resistance. These resins can be ideally used in Paxon applications where the filling rate of spare parts and excellent performance of finished parts are required during processing.™7000 series of grades have long-term UV stability. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal, F0 | > 1000 | hr | ASTM D1693 |
| 100% Igepal, F0 | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 19.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 20 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 600 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength | ARM | ||
| -40°C, 3.18 mm | 102 | J | ARM |
| -40°C, 6.35 mm | 258 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 61.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 37.0 | °C | ASTM D648 |
| Additional Information |
|---|
| '- 除了 ESCR 是基于模压样本测定之外，所有物理性能均基于 3 mm 的滚塑样本 测定，除非注明的是其他值。 可以修改测试流程以适应操作条件或设施限制。 |
| Legal statement |
|---|
| 本产品不宜在与食品接触的应用中使用。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAMID™ TB120ST | Mando Advanced Materials Co., Ltd. | Nylon 6 | TEKAMID™ |
| NYLOY® MG-0034N-V0 | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| Dryflex® 47722 | ELASTO | TPE | Dryflex® |
| DURANEX® 457EV | Polyplastics Co., Ltd. | PC+PBT | DURANEX® |
| HIPOLEN P® TM 21G | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
