Order Products : sales@su-jiao.com
Durethan® DP 2325 H3.0 000000
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | LANXESS Asia/Pacific |
| Trademark: | Durethan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | seHvoq_DurethanDP2325H30000000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 66, non-reinforced, injection molding, improved impact strength, heat-aging stabilized |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density (23°C) | 1.08 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ||||
| Vertical flow direction : 280°C, 2.00mm 1 | 1.6 | -- | % | ISO 294-4 |
| Vertical flow direction : 120°C, 2 hours, 2.00mm 2 | 0.20 | -- | % | ISO 294-4 |
| Flow direction : 280°C, 2.00mm 3 | 2.1 | -- | % | ISO 294-4 |
| Flow direction : 120°C, 2 hours, 2.00mm 4 | 0.50 | -- | % | ISO 294-4 |
| Vertical flow direction : 280°C, 3.00mm 5 | 1.9 | -- | % | ISO 2577 |
| Vertical flow direction : 120°C, 2 hours, 3.00mm 6 | 0.10 | -- | % | ISO 294-4 |
| Flow direction : 280°C, 3.00mm 7 | 2.1 | -- | % | ISO 2577 |
| Flow direction : 120°C, 2 hours, 3.00mm 8 | 0.50 | -- | % | ISO 2577 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 7.0 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.0 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 1800 | 700 | MPa | ISO 527-2/1 |
| Tensile Stress | ||||
| Yield, 23°C | 50.0 | 30.0 | MPa | ISO 527-2/50 |
| Fracture, 23°C | 47.0 | 49.0 | MPa | ISO 527-2/5 |
| Tensile Strain | ||||
| Yield, 23°C | 21 | 38 | % | ISO 527-2/50 |
| Fracture, 23°C | 80 | 290 | % | ISO 527-2/5 |
| Nominal Tensile Strain at Break (23°C) | 50 | 50 | % | ISO 527-2/50 |
| Flexural Modulus 9(23°C) | 1700 | 660 | MPa | ISO 178/A |
| Flexural Stress 10 | ||||
| 3.5% strain | 55.0 | 19.0 | MPa | ISO 178/A |
| 23°C | 70.0 | 27.0 | MPa | ISO 178 |
| Flexural Strain at Flexural Strength 11(23°C) | 7.2 | 8.7 | % |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Behavior 12(> 1.00 mm) | 25 | -- | ISO 3795 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Shortname | PA 66-HI, GHR, 14-020 | -- | ISO 1874 |
| Injection | Dry | Unit | Test Method |
|---|---|---|---|
| Residual Moisture Content | 0.030 - 0.12 | % | Karl Fisher |
| Films | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Film Puncture Energy | ISO 6603-2 | |||
| -- 13 | 60.0 | -- | J | ISO 6603-2 |
| -- 14 | 50.0 | -- | J | ISO 6603-2 |
| Film Puncture Force | ISO 6603-2 | |||
| -- 15 | 5400 | -- | N | ISO 6603-2 |
| -- 16 | 3900 | -- | N | ISO 6603-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 20 | 20 | kJ/m² | ISO 179/1eA |
| 23°C | 50 | 100 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ISO 179/1eU | |
| 23°C | No Break | No Break | ISO 179/1eU | |
| Notched Izod Impact | ISO 180/1A | |||
| -30°C | 25 | 20 | kJ/m² | ISO 180/1A |
| 23°C | 80 | 100 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | ISO 180/1U | |||
| -30°C | No Break | No Break | ISO 180/1U | |
| 23°C | No Break | No Break | ISO 180/1U |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 110 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 60.0 | -- | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | 50.0 | -- | °C | ISO 75-2/C |
| Vicat Softening Temperature | > 200 | -- | °C | ISO 306/B50, ISO 306/B120 |
| Melting Temperature 17 | 263 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow : 23 to 55°C | 1.3E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 55°C | 1.3E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+15 | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity (23°C) | 1.0E+19 | 1.0E+17 | ohms·cm | IEC 60093 |
| Dielectric Strength (23°C, 1.00 mm) | 40 | 45 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | |||
| 23°C, 100 Hz | 3.50 | 7.00 | IEC 60250 | |
| 23°C, 1 MHz | 3.00 | 3.40 | IEC 60250 | |
| Dissipation Factor | IEC 60250 | |||
| 23°C, 100 Hz | 8.0E-3 | 0.15 | IEC 60250 | |
| 23°C, 1 MHz | 0.015 | 0.075 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.60 mm | HB | -- | UL 94 | |
| 3.20 mm | HB | -- | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 650 | -- | °C | IEC 60695-2-12 |
| Oxygen Index 18 | 20 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | Test Method |
|---|---|---|---|
| Drying Temperature - Dry Air Dryer | 80.0 | °C | |
| Drying Time - Dry Air Dryer | 2.0 - 6.0 | hr | |
| Processing (Melt) Temp | 270 - 290 | °C | |
| Mold Temperature | 80.0 - 100 | °C |
| Note Message | |
|---|---|
| 1 . | 60x60x2; MT 80°C; 600 Bar |
| 2 . | 60x60x2 |
| 3 . | 60x60x2; MT 80°C; 600 Bar |
| 4 . | 60x60x2 |
| 5 . | 150x150x3; MT 80°C; 500 Bar |
| 6 . | 150x150x3 |
| 7 . | 150x150x3; MT 80°C; 500 Bar |
| 8 . | 150x150x3 |
| 9 . | 2.0 mm/min |
| 10 . | 2.0 mm/min |
| 11 . | Pull Rate: 2 mm/min; 50% RH |
| 12 . | US-FMVSS302 |
| 13 . | -30°C |
| 14 . | 23°C |
| 15 . | -30°C |
| 16 . | 23°C |
| 17 . | 10°C/min |
| 18 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HF501N | LyondellBasell Industries | PP Homopolymer | Moplen |
| NEFTEKHIM PP 8300L | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| Borealis PE FA7229 | Borealis AG | LDPE | Borealis PE |
| Latigray 47/1-01 CX/45 | LATI S.p.A. | PP Copolymer | Latigray |
| MAJORIS G400 | AD majoris | PP, Unspecified | MAJORIS |
