Order Products : sales@su-jiao.com
EnCom PA6U GR15 MF25 BK 42004
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | scQgit_EnCom-PA6U-GR15-MF25-BK-42004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass & Mineral Filled Nylon 6 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 5.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 122 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.3 | % | ASTM D638 |
| Flexural Modulus | 10800 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 188 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 213 | °C | |
| 1.8 MPa, Unannealed | 199 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.57 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 73.9 to 93.3 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 238 to 282 | °C | |
| Middle Temperature | 238 to 282 | °C | |
| Front Temperature | 243 to 296 | °C | |
| Nozzle Temperature | 243 to 296 | °C | |
| Processing (Melt) Temp | 252 to 296 | °C | |
| Mold Temperature | 71.1 to 104 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® ESD 6300 | Premix Oy | PS (HIPS) | PRE-ELEC® |
| Sylvin 8448-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Tuftec™ H1121 | AKelastomers | SEBS | Tuftec™ |
| Axiall PVC MP-6510 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Eltex® TUB121 | INEOS Olefins & Polymers Europe | HDPE Copolymer | Eltex® |
