Order Products : sales@su-jiao.com

Marlex® 9018

Category:	HDPE , High Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	saOZ7P_Marlex-9018.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® 9018 is a High Density Polyethylene material. It is available in Europe, Latin America, or North America for injection molding.

Important attributes of Marlex® 9018 are:

Eco-Friendly/Green

Food Contact Acceptable

Good Stiffness

Hexene Comonomer

Impact Resistant

Typical applications include:

Containers

Automotive

Caps/Lids/Closures

Consumer Goods

Food Contact Applications

General Information
Features	Durable Food Contact Acceptable Good Flow Good Impact Resistance Good Stiffness Hexene Comonomer Recyclable Material
Uses	Automotive Applications Caps Containers Household Goods Pails Toys
Agency Ratings	ASTM D 4976-PE232 FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.952	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	20	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)	< 10.0	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	63		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	27.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	300	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	1200	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746A
Vicat Softening Temperature	122	°C	ASTM D1525 ⁴

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min
4 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
S&E Wire & Cable GA-1046CTLF	S&E Specialty Polymers, LLC	PVC, Semi-Rigid	S&E Wire & Cable
NYCOA Polyamide 512 HS	Nycoa (Nylon Corporation of America)	Nylon 6	NYCOA Polyamide
ASI POLYSTYRENE PS 3010-01	A. Schulman Inc.	PS (HIPS)	ASI POLYSTYRENE
LG PMMA IF850B	LG MMA Corp.	Acrylic (PMMA)	LG PMMA
3M™ Dyneon™ Fluoroelastomer FE 5642	3M Advanced Materials Division	Fluorelastomer	3M™ Dyneon™ Fluoroelastomer