Order Products : sales@su-jiao.com

PrimoTuff 118E

Category:	TPO (POE) , Thermoplastic Polyolefin Elastomer
Manufacturer:	KMI Group Inc.
Trademark:	PrimoTuff
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sYkgv3_PrimoTuff-118E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications. Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C. Excellent dimensional stability Outstanding rigidity Fully Weatherable Recyclable PPI will customize to adjust for mold shrink required by the customer Full range of colors

Message

Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications.

Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C.

Excellent dimensional stability

Outstanding rigidity

Fully Weatherable

Recyclable

PPI will customize to adjust for mold shrink required by the customer

Full range of colors

General Information
Features	Good Dimensional Stability Good Impact Resistance Good Toughness Good Weather Resistance High Rigidity Low Temperature Impact Resistance Recyclable Material
Processing Method	Injection Molding Profile Extrusion Sheet Extrusion

Physical	Nominal Value	Unit
Density	1.09	g/cm³
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.090	g/10 min

Mechanical	Nominal Value	Unit
Tensile Strength (Yield)	20.0	MPa
Flexural Modulus	1800	MPa

Impact	Nominal Value	Unit
Notched Izod Impact Strength
23°C	60	kJ/m²
30°C	10	kJ/m²

Thermal	Nominal Value	Unit
Heat Deflection Temperature (0.45 MPa, Unannealed)	100	°C
CLTE - Flow	4.0E-5	cm/cm/°C

Additional Information	Nominal Value	Unit
AMMS	0.70	%
Ductility	-25	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 1000 L	RTP Company	PBT	RTP
FireCon™ CPE 1240 UV RoHS NATURAL	PolyOne Corporation	CPE	FireCon™
Gallonprene® GP210-7510	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Hipolyene 8021 MF HF	Zylog Plastalloys	TPO (POE)	Hipolyene
LUBAN™ 1102 KQH	Oman Oil Refineries & Petroleum Indistries Co. (Orpic)	PP Homopolymer	LUBAN™