Order Products : sales@su-jiao.com
Thermec™ 4301R35H
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Technical Polymers, LLC |
| Trademark: | Thermec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sOcwaD_Thermec-4301R35H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermec™4301R35H is a polyxylene amide (PPA) material, which contains a 35% glass fiber reinforced material. This product is available in North America and is processed by injection molding. Thermec™The main features of 4301R35H are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 207 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.5 | % | ASTM D638 |
| Flexural Modulus (23°C) | 10300 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 303 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 274 | °C | ASTM D648 |
| Melting Temperature | 288 | °C | DSC |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Tensile Elongation, ASTM D638: 2 to 3%Volum Resistivity, ASTM D257: >1e15 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 98.9 - 107 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 321 - 332 | °C | |
| Mold Temperature | 135 - 163 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.103 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² | |
| Cushion | 3.18 - 12.7 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.0:1.0 to 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9662-65 Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| 4MID® 9B22150 | 4Plas | Nylon 6 | 4MID® |
| Dynaprene® SE9040A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
| K-Resin® SBC KR53 | Chevron Phillips Chemical Company LLC | SBC | K-Resin® SBC |
| Hyundai EP PA6 LS130 | HYUNDAI EP Co., Ltd. | Nylon 6 | Hyundai EP PA6 |
