Order Products : sales@su-jiao.com
FuTuRe-PET® 1125
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Indorama Ventures Polymers México |
| Trademark: | FuTuRe-PET® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sOOaBD_FuTuRePET1125.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FuTuRe-PET®1125 is a polyethylene terephthalate (PET) material,. This product is available in Latin America and is processed by stretch blow molding. FuTuRe-PET®The main features of the 1125 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | Internal method |
| Apparent Density | 0.90 | g/cm³ | Internal method |
| Acetaldehyde | 0.50 | ppm | Internal method |
| Color b | -2.50 | Internal method | |
| Crystallinity | 53 | % | Internal method |
| Intrinsic Viscosity 1 | 0.84 | dl/g | Internal method |
| Moisture Content | 0.15 | wt% | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Chip Size | 80.0 | pcs/g | Internal method |
| Fines | % | Internal method | |
| Yellow Chips | pcs/125 g | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 240 | °C | Internal method |
| Note Message | |
|---|---|
| 1 . | Determined by conversion of solution viscosity to intrinsic viscosity using an empirical correlation developed by Indorama Ventures Polymers México. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® MV 10 | Versalis S.p.A. | LDPE | Riblene® |
| Dynacom 701-G10 | Dynachem Co. Ltd. | PP Copolymer | Dynacom |
| ESPREE™ ABS20GF | SABIC Innovative Plastics | ABS | ESPREE™ |
| EPAMOULD 665A76 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
| OTECH TPO OTR7788-Molding | OTECH Corporation | TPE | OTECH TPO |
