Order Products : sales@su-jiao.com

EPDM 565

Category:	EPDM , Hydrocarbon Rubber
Manufacturer:	The Dow Chemical Company
Trademark:	EPDM
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sNISIl_EPDM-565.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EPDM 565 is an amorphous, high diene ethylene-propylene-diene terpolymer (EPDM) grade designed for extruded applications requiring fast cure rates. It is ideally suited for continuously cured dense and sponge profiles. Molded applications will also benefit from the fast cure response, allowing shorter cycle times. Main Characteristics: Amorphous High diene High molecular weight Fast cure Good low temperature properties Applications: Extruded profiles/weather strip Sponge profiles Complies with U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details.

Message

EPDM 565 is an amorphous, high diene ethylene-propylene-diene terpolymer (EPDM) grade designed for extruded applications requiring fast cure rates. It is ideally suited for continuously cured dense and sponge profiles. Molded applications will also benefit from the fast cure response, allowing shorter cycle times.

Main Characteristics:

Amorphous

High diene

High molecular weight

Fast cure

Good low temperature properties

Applications:

Extruded profiles/weather strip

Sponge profiles

Complies with

U.S. FDA 21 CFR 175.105 (Adhesives only).

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 175.105
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.860	g/cm³	ASTM D297
Mooney Viscosity (ML 1+4, 125°C)	61 - 69	MU	ASTM D1646
Ethylene Content	48.5 - 51.5	wt%	ASTM D3900
Ethylidene Norbornene (ENB) Content	7.1 - 7.9	wt%	ASTM D6047
Propylene content	42.5	wt%	ASTM D3900
Residual conversion metal		ppm	Internal method
Molecular Weight Distribution	Medium		Internal method
Ash Content		wt%	ASTM D5667
Volatile Matter		wt%	Internal method

Additional Information
Storage and Handling:The quality of EPDM products may be affected by exposure to artificial or natural light. This product should be stored indoors in its original packaging and out of direct sunlight.

Resin Grade	Manufacturer	Category	Trademark
ALCOM® POM 770/1 Si2	ALBIS PLASTIC GmbH	Acetal (POM) Copolymer	ALCOM® POM
BP Flex D 4107 C BLK	Buckeye Polymers, Inc.	TPO	BP Flex
Kumho SAN SAN 310CTR	Korea Kumho Petrochemical Co., Ltd.	SAN	Kumho SAN
Karina WHITE PVC COMPOUND 653D10/ 1-C-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
LNP™ VERTON™ NV0041EV_GY7E147 compound	SABIC Innovative Plastics	PC+ABS	LNP™ VERTON™