Order Products : sales@su-jiao.com
SureSpec HD55-30
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sMEg65_SureSpec-HD55-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD55-30 is a Phillips Process Blow Molding copolymer certified prime grade designed to meet end-use requirements of containers for packaging of Household Industrial Chemicals (HIC). HD55-30 features medium swell, easy and consistent processability in conventional continuous or intermittent extrusion equipment, and excellent balance of bottle ESCR, Impact strength and Stiffness. HD55-30 recommended processing temperature is 160 to 180°C., with mold at 10 to 30°C. HD55-30 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) + 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, molded, F50) | 50.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 700 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 206 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Mold Temperature | 10 - 30 | °C | |
| Blow Molding Temperature | 160 - 180 | °C | |
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vipel® K022-EBB-00 | AOC, L.L.C. | Vinyl Ester | Vipel® |
| Xuchuan XCW-50H | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| BCC Resins BC 8010 | BCC Products Inc. | PUR, Unspecified | BCC Resins |
| BMC 1100 CoreLyn | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| HiFill® PA6/6 GF/M20 IM BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
