Order Products : sales@su-jiao.com

Pinnacle PP 2135N

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sI3Q4h_Pinnacle-PP-2135N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

35 MELT FLOW IMPACT COPOLYMER FOR INJECTION MOLDING

Pinnacle Polymers Polypropylene 2135N is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for packaging, housewares and consumer products requiring higher Flex and toughness. Contains nucleator, but no antistatic.

The 2135N product provides:

High stiffness and excellent impact strength

High melt flow

Fast cycle-time

Superior processability

Excellent lot-to-lot consistency

Pinnacle's 2135N polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Additive	Nucleating Agent
Features	Fast Molding Cycle Food Contact Acceptable Good Flexibility Good Processability Good Toughness High Flow High Impact Resistance High Stiffness Impact Copolymer Nucleated
Uses	Consumer Applications Household Goods Packaging
Agency Ratings	FDA 21 CFR 176.170 Tables 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	22.8	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	6.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1100	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 190	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	> 18.3	kJ/m²	ASTM D256
Gardner Impact ⁶(-30°C)	22.0	J	ASTM D5420

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I
6 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
Premi-Glas® 2207-22 CR-SX	Premix, Inc.	TS, Unspecified	Premi-Glas®
Versaflex™ FFC 2882-50 EU	PolyOne Corporation	TPE	Versaflex™
TRIBIT® 1500G20	Samyang Corporation	PBT	TRIBIT®
Adell PBT HR-34	Adell Plastics, Inc.	PBT	Adell PBT
Ateva® 1608	Celanese EVA Performance Polymers	EVA	Ateva®