Order Products : sales@su-jiao.com
Integra™ PEI1000HF
| Category: | PEI , Polyether Imide |
| Manufacturer: | PolySource, LLC |
| Trademark: | Integra™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sGodWN_IntegraPEI1000HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Flow Polyetherimide |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (337°C/6.6 kg) | 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.50 - 0.70 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.18 mm) | 110 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 3.18mm | 7.0 | % | ASTM D638 |
| Fracture, 3.18mm | 60 | % | ASTM D638 |
| Flexural Modulus (3.18 mm) | 3520 | MPa | ASTM D790 |
| Flexural Strength (Yield, 3.18 mm) | 165 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 199 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRIPRO T8002 | Formosa Plastics Corporation | PP Impact Copolymer | TAIRIPRO |
| Westlake TPX® Film | Westlake Plastics Company | PMP | Westlake |
| Daelim Po1y® LH-402 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Europrene® 1778 | Versalis S.p.A. | SBR, Emulsion | Europrene® |
| Durethan® BKV 140 DUS008 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
