Order Products : sales@su-jiao.com
DynaMix Lite™ 2044-GBD
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix Lite™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sGoafw_DynaMix-Lite-2044-GBD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glass Bead Filled Dimensionally Stable Nylon Features:
Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 0.80 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5170 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 89.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 5170 | MPa | ASTM D790 |
| Flexural Strength | 131 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 80 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 to 110 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Rear Temperature | 254 to 293 | °C | |
| Middle Temperature | 260 to 293 | °C | |
| Front Temperature | 266 to 293 | °C | |
| Nozzle Temperature | 271 to 293 | °C | |
| Processing (Melt) Temp | 271 to 293 | °C | |
| Mold Temperature | 93.3 to 113 | °C | |
| Injection Rate | Slow-Moderate | ||
| Screw Speed | 20 to 100 | rpm | |
| Clamp Tonnage | 5.5 to 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-1050-80 | Teknor Apex Company | TPE | Telcar® |
| Stylac™ 181 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| EMPILON® 570 | EMPILON | SEBS | EMPILON® |
| INEOS PP L40N-00 | INEOS Olefins & Polymers USA | PP Impact Copolymer | INEOS PP |
| Osterlene® HD0860 | Osterman & Company | HDPE | Osterlene® |
