Order Products : sales@su-jiao.com
Moplen EP5000
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sGKkNm_Moplen-EP5000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen EP5000 is the reactor TPO manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP5000 is a non-filled copolymer for injection moulding with very high impact strength. This grade is natural, in pellet form. Typical application for Painted bumpers and wood composite. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 50 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 20.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 5.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1230 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, Injection Molded | 98 | J/m | |
| 23°C, Injection Molded | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 100 | °C | ASTM D648 |
| Vicat Softening Temperature | 135 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® AP36BK6738 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| DURACON® AW-09 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
| Geon™ Vinyl Fittings M1150 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Fittings |
| KEBAFLEX® E 75.1 | BARLOG plastics GmbH | TPV | KEBAFLEX® |
| POLYFLON™ D-6B | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
