Order Products : sales@su-jiao.com
Dryflex® A1 90A301N
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sE6iPi_Dryflex-A1-90A301N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex A1 90A301N: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 90 Shore A (4mm) Service Temperature Range: -50 -- +125 °C (unstressed material) Colour: Natural, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable The material is modified to give good adhesion to PA |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 23 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 6.00 | MPa | ASTM D638 |
| 300% secant | 9.00 | MPa | ASTM D638 |
| Tensile Strength | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 510 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 57.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature - Unstressed Material | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 250 | °C | |
| Middle Temperature | 180 - 250 | °C | |
| Front Temperature | 180 - 250 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 250 | °C | |
| Cylinder Zone 2 Temp. | 150 - 250 | °C | |
| Cylinder Zone 3 Temp. | 150 - 250 | °C | |
| Cylinder Zone 4 Temp. | 150 - 250 | °C | |
| Cylinder Zone 5 Temp. | 150 - 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2285 HF | RTP Company | PEEK | RTP |
| Rulon® J | Saint Gobain Performance Plastics | PTFE | Rulon® |
| NILFLEX® 14 K15TE | Taro Plast S.p.A. | PP Copolymer | NILFLEX® |
| Chemlon® 190 | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| Jam PE 30Y04 | Jam Petrochemical Company | LLDPE | Jam PE |
