Order Products : sales@su-jiao.com
OnFlex™ U 5365A-E0134 FG
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sB25NF_OnFlex-U-5365A-E0134-FG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-U thermoplastic elastomer polymer is a mixture of thermoplastic polyurethane elastomer (TPE-U). OnFlex™-U 5300 series products are alloys of SEBS and TPU, which combine the advantages of these two raw materials, such as good processability, a TPE-S soft touch, excellent mechanical properties, and a TPE-U abrasion resistance. OnFlex™-U 5300 polymer has very good scratch resistance, large hardness range and good chemical resistance. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 65 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| Transverse flow : Fracture | 22.7 | MPa | DIN 53504 |
| Flow : Fracture | 13.1 | MPa | DIN 53504 |
| Tensile Elongation | DIN 53504 | ||
| Transverse flow : Fracture | 830 | % | DIN 53504 |
| Flow : Fracture | 620 | % | DIN 53504 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| General Material Type | Thermoplastic Polyurethane Elastomer (TPU) | ||
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 170 - 210 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® PP 1329 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
| SANTAC® AT-08 | Nippon A&L Inc. | ABS | SANTAC® |
| Mylar® WC (142 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Hostaform® EC140XF | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Geon™ Vinyl Flexible HC27000G | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
