Order Products : sales@su-jiao.com
Bapolene庐 350F
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Bamberger Polymers, Inc. |
| Trademark: | Bapolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sAwWqY_Bapolene-350F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Superior melt, good processability, bubble stability, and drawdown |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.050 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 6.5 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 20 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Broken, 20 µm, blown film | 52.0 | MPa | ASTM D882 |
| TD : Broken, 20 µm, blown film | 33.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 20 µm, blown film | 200 | % | ASTM D882 |
| TD : Broken, 20 µm, blown film | 200 | % | ASTM D882 |
| Dart Drop Impact (20 µm, Blown Film) | 13 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 20 µm, blown film | 1.1 | g | ASTM D1922 |
| TD : 20 µm, blown film | 6.2 | g | ASTM D1922 |
| Additional Information |
|---|
| Film properties are based on a thickness of 0.8 mil and blow-up ratio of 4:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx TPP1B10 | The Matrixx Group, Inc. | PP, Unspecified | Matrixx |
| Sinvicomp SMG6000 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| UNITIKA Nylon 6 CX-2500 | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| Nycal™ 2150RMC40 | Technical Polymers, LLC | Nylon 66 | Nycal™ |
| ELASTOSIL® M 4641 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® M |
