Order Products : sales@su-jiao.com
TPX® RT18XB
| Category: | PMP Copolymer , Polymethylpentene Copolymer |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | TPX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s8O3pf_TPXRT18XB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPX®RT18XB is a polymethylpentene copolymer (PMP copolymer) material,. This product is available in Europe or Asia Pacific region. The processing method is injection molding. TPX®The main characteristics of RT18XB are: hardness. TPX®The typical application areas of RT18XB are: food contact applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.833 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 26 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 2.1 | % | ASTM D955 |
| Transverse flow | 1.7 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 88 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1770 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 26.0 | MPa | ASTM D638 |
| 23°C | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 32 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1570 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 48.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 176 | °C | ASTM D1525 |
| Melting Temperature | 237 | °C | |
| CLTE - Flow | 3.8E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 63 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.12 | ASTM D150 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Refractive Index | 1.463 | ASTM D542 | |
| Clarity | 94.0 | ASTM D1746 | |
| Haze | 1.1 | % | ASTM D1003 |
| Additional Information |
|---|
| Unnotched Izod Impact, ASTM D256, 23°C: 11 kJ/m² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE AB-2233D | Teknor Apex Company | TPE | Sarlink® TPE |
| SHIN-A SE-310P | SHIN-A T&C | Epoxy | SHIN-A |
| Akulon® K224-G3 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| OmniLon™ PA6/6 MF20 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| ESTOPLAST EP 4140GY11 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
