Order Products : sales@su-jiao.com
Nylene® 4214 HS
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Custom Resins Group |
| Trademark: | Nylene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s72VfF_Nylene-4214-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nylene® 4214 HS is a Polyamide 6 (Nylon 6) material. It is available in North America for extrusion or injection molding. Important attributes of Nylene® 4214 HS are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.4 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 38.6 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 200 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 43.3 | °C | ASTM D648 |
| Melting Temperature | 216 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 to 82.2 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Suggested Shot Size | 25 to 75 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 227 to 260 | °C | |
| Middle Temperature | 238 to 271 | °C | |
| Front Temperature | 249 to 282 | °C | |
| Nozzle Temperature | 249 to 282 | °C | |
| Processing (Melt) Temp | 249 to 282 | °C | |
| Mold Temperature | 48.9 to 93.3 | °C | |
| Injection Pressure | 48.3 to 103 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 34.5 to 82.7 | MPa | |
| Back Pressure | 0.00 to 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren N110 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | LDPE | Sanren |
| TEKNIFLEX® VPA10400 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PE/PCTFE | TEKNIFLEX® |
| LUVOCOM® 1105-7041 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Mablex 459 | Ravago Group | PC+ABS | Mablex |
| RTP 199 X 143685 A | RTP Company | PP, Unspecified | RTP |
