Order Products : sales@su-jiao.com
Alkathene® LDF433AB
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkathene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s6lG7W_Alkathene-LDF433AB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LDF433AB is a low density polyethylene designed for a variety of medium to heavy gauge (70 - 200µm) applications where increased stiffness is required. LDF433AB is formulated with antiblock and stabilisation (BHT free). LDF433AB is intended for use in medium to heavy gauge (70 - 200µm) applications where increased stiffness is required. LDF433AB is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c), item 2.1. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.38 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 0.40 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 100 | µm | |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 100 µm | 120 | MPa | ASTM D882 |
| 2% secant, TD : 100 µm | 140 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 100 µm | 11.0 | MPa | ASTM D882 |
| TD : Yield, 100 µm | 11.0 | MPa | ASTM D882 |
| MD : Break, 100 µm | 20.0 | MPa | ASTM D882 |
| TD : Break, 100 µm | 21.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 100 µm | 410 | % | ASTM D882 |
| TD : Break, 100 µm | 670 | % | ASTM D882 |
| Dart Drop Impact (100 µm, Blown Film) | 270 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 100 µm | 570 | g | ASTM D1922 |
| TD : 100 µm | 590 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (100 µm, Blown Film) | 58 | ASTM D2457 | |
| Haze (100 µm, Blown Film) | 13 | % | ASTM D1003 |
| Additional Information |
|---|
| Film properties taken from blown film processed at a blow up ratio of 3.2:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Repro Nylon 6 6 | ResMart | Nylon 66 | ResMart Repro |
| TEKNIFLEX® PTA260 | Tekni-Films, a div of Tekni-Plex | Film, PE/PCTFE | TEKNIFLEX® |
| TYNEL® U4491 | Tyne Plastics LLC. | PEI | TYNEL® |
| Rotuba CA Rotuba H | Rotuba Extruders, Inc. | CA | Rotuba CA |
| Infino WR-7000P | LOTTE ADVANCED MATERIALS CO., LTD. | ASA+PC | Infino |
