Order Products : sales@su-jiao.com
Dryflex® 660550S
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s5nVXD_Dryflex-660550S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage | 0.80 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| -- | 6.00 | MPa | |
| 100% Strain | 2.00 | MPa | |
| 300% Strain | 3.00 | MPa | |
| Tensile Elongation (Break) | > 600 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 25.0 | kN/m | ASTM D624 |
| Compression Set (23°C, 72 hr) | 17 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 125 | °C |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding - to PP | Excellent |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® M black AST | Röchling Engineering Plastics SE & Co. KG | UHMWPE | POLYSTONE® |
| TRIMMA® SD6320P | Samyang Corporation | Acrylic (PMMA) | TRIMMA® |
| Niuk 50RNG30 | Shanghai Niuk New Plastic Technology Co., Ltd. | Nylon 66 | Niuk |
| Hostacom D1179 0907 | LyondellBasell Industries | PP Impact Copolymer | Hostacom |
| GELOY™ EXGY0071 resin | SABIC Innovative Plastics | ASA | GELOY™ |
