Order Products : sales@su-jiao.com
Generic PPE+PS - Mineral
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rzV5l9_Generic-PPE-PS---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPE+PS - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 2300 - 5780 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 82.2 - 126 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 - 108 | °C | |
| Drying Time | 3.5 - 4.0 | hr | |
| Processing (Melt) Temp | 250 - 304 | °C | |
| Mold Temperature | 90.0 - 90.6 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPE+PS - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-0231MPM75 | SHIN-A T&C | Epoxy | SHIN-A |
| NuSil CV-1144-0 | NuSil Technology | Silicone | NuSil |
| BESTNYL SE50VI02AH | Triesa Plastics | Nylon 66 | BESTNYL |
| API PS 645-21 | American Polymers, Inc. | PS (HIPS) | API PS |
| PENTAMID A GV30 H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
