Order Products : sales@su-jiao.com
Celazole® (T Series) TU-60
| Category: | PBI , Polybenzimidazole |
| Manufacturer: | PBI Performance Products, Inc. |
| Trademark: | Celazole® (T Series) |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rxgbiB_Celazole-T-Series-TU-60.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Celazole TU-60 is a high performance unfilled blend, ideal for applications requiring no fillers. This material works well for complex geometries and offers the best process ability. Ideal for lamp sockets, connectors and back up seals. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | |
| Water Absorption (Equilibrium) | 6.5 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (A-Scale) | 25 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5030 | MPa | ASTM D638 |
| Tensile Strength | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.2 | % | ASTM D638 |
| Flexural Modulus | 5000 | MPa | ASTM D790 |
| Flexural Strength | 175 | MPa | ASTM D790 |
| Compressive Modulus | 2960 | MPa | ASTM D695 |
| Compressive Strength | 207 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | TMA | ||
| 24 to 149°C | 3.4E-5 | cm/cm/°C | TMA |
| 199 to 299°C | 7.0E-5 | cm/cm/°C | TMA |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 17 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 3.40 | ASTM D150 | |
| 10 kHz | 3.40 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 0.0 | ASTM D150 | |
| 10 kHz | 1.0E-3 | ASTM D150 | |
| Arc Resistance | 135 | sec | ASTM D495 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Temperature of Intial Weight Loss | Internal method | ||
| Air | 499 | °C | Internal method |
| Nitrogen | 499 | °C | Internal method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx FP62E33 | The Matrixx Group, Inc. | Nylon 6 | Matrixx |
| SEQUEL® E3000 | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| NEXT SIGNATURE PA6 G33-300 | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT SIGNATURE |
| AMTOPP CM18 | Inteplast Group | PP, Unspecified | AMTOPP |
| PENTAMID B E20 H black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
