Order Products : sales@su-jiao.com
MOSTEN MA 745
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | UNIPETROL RPA |
| Trademark: | MOSTEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rxc58c_MOSTEN-MA-745.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene Mosten MA 745 is a high melt flow block copolymer with antistatic additivation, intended for injection moulding of parts requiring high flowability and impact strength. It is suitable for thin walled injection moulding into multiple moulds. Typical application is production of various foodstuffs packaging, boxes, crates (clap-boxes), etc. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 45 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 35 | % | ISO 527-2 |
| Flexural Modulus | 1400 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -20°C | 4.0 | kJ/m² | |
| 23°C | 8.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 56.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 151 | °C | ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Battery GPP6025 | S&E Specialty Polymers, LLC | TPO | S&E Battery |
| 3M™ Dyneon™ Fluoroplastic THV 221AZ | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroplastic |
| ALTECH® PA6 A 2030/320 GF30 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Rotec® ASA E 610 | ROMIRA GmbH | ASA | Rotec® ASA |
| LNP™ THERMOCOMP™ RC004SXS compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
