Order Products : sales@su-jiao.com
CONATHANE® EN-14
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONATHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rq3fpk_CONATHANE-EN-14.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CONATHANE EN-14, or EN-14 Black, is a two-component, unfilled, low viscosity, fast-gelling, fast-curing, flexible polyurethane elastomer system designed for potting and encapsulation of electrical and electronic assemblies. CONATHANE EN-14 is a non-mercury version of CONATHANE® DPEN 8536. The cured system features excellent water resistance, thermal shock resistance, and electrical properties. The initial low viscosity of the system allows good penetration into fine windings. CONATHANE EN-14 is fully transparent and can easily be cut to remove defective components. Repairs can be made by application of more of the liquid system. CONATHANE EN-14 is particularly recommended for potting and encapsulating strain and heat sensitive devices in modules, connectors, and units required to operate in the temperature range of -65°C to 130°C. It also has shown utility as a conformal coating and can be applied by casting, spraying, or brushing. Airless spray equipment can be used effectively. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 0.968 | g/cm³ | |
| -- 2 | 1.04 | g/cm³ | |
| -- 3 | 1.10 | g/cm³ | |
| Water Absorption | |||
| 24 Hrs. : 25°C | 0.40 | % | |
| 7 days : 25°C | 0.79 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Gel Time (25°C) | 20.0 | min |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure Time | |||
| 25°C | 3.0 to 4.0 | day | |
| 60°C | 0.1 | day | |
| Thermal Shock Test - 10 cycles, -65°C to 130°C | Passes | ||
| Work Life (25°C) | 15.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Linear Shrinkage | 0.31 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 65 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 4.83 | MPa | |
| Tensile Elongation (Break) | 110 | % |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tear Strength | 6.13 | kN/m |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 4 | 1.0E+13 | ohms | |
| Volume Resistivity (25°C) | 3.0E+13 | ohms·cm | |
| Dielectric Strength | > 20 | kV/mm | |
| Dielectric Constant | |||
| 25°C, 100 Hz | 5.71 | ||
| 25°C, 1 MHz | 3.42 | ||
| Dissipation Factor | |||
| 25°C, 100 Hz | 0.12 | ||
| 25°C, 1 MHz | 0.038 | ||
| Arc Resistance | > 120 | sec |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-2 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 90 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity | |||
| 25°C 5 | 1200 | cP | |
| 25°C 6 | 1000 | cP | |
| 25°C 7 | 1500 | cP |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Mixed |
| 3 . | Resin |
| 4 . | 25°C |
| 5 . | Mixed |
| 6 . | Hardener |
| 7 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® B3 2 RM-D natural (3391) | AKRO-PLASTIC GmbH | Nylon 6+ABS | AKROMID® |
| Colorite CS Series CS9039GP | Colorite Polymers | PVC, Flexible | Colorite CS Series |
| LGG 108 | LG Polymers India Pvt. Ltd. | PS (GPPS) | LGG |
| ESTOPLAST XU 6515NN01 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
| LNP™ LUBRICOMP™ RX01514 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
