Order Products : sales@su-jiao.com
MELMEX MG
| Category: | Mel Formald , Melamine Formaldehyde |
| Manufacturer: | BIP (Oldbury) Limited |
| Trademark: | MELMEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | riEzdC_MELMEX-MG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dry granulated available in a limited range of popular colours. Its granular form makes it easy to handle and can be moulded by either pelleting and HF preheating or directly as a cold powder. Suitable for food contact applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.50 | g/cm³ | ISO 1183 |
| Apparent Density | 0.68 | g/cm³ | ISO 60 |
| Bulk Factor | 2.2 | ISO 171 | |
| Molding Shrinkage 1 | 0.65 | % | ISO 2577 |
| Water Absorption | |||
| Cold 2 | 135.0 | mg | DIN 53472 |
| Cold 3 | 20.0 | mg | ISO 62 |
| Hot 4 | 64.0 | mg | ISO 62 |
| Post Shrinkage | ISO 2577 | ||
| -- 5 | 0.85 | % | |
| -- 6 | 1.2 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Martens Temperature | 150 | °C | DIN 43458 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | 100 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 1.8 | kJ/m² | ISO 180/C |
| Unnotched Izod Impact Strength | 8.4 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 170 | °C | ISO 75-2/Ae |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Electric Strength | IEC 60243-1 | ||
| -- 7 | 6.5 | kV/mm | |
| -- 8 | 6.1 | kV/mm | |
| Comparative Tracking Index | > 600 | V | IEC 60167 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 | |
| Oxygen Index 9 | 41 | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | Preheated powder |
| 2 . | 96 hr @ 23°C |
| 3 . | 24 hr @ 23°C |
| 4 . | 30 min @ 100°C |
| 5 . | Cold powder |
| 6 . | (48 hr) Preheated powder |
| 7 . | (90°C) Preheated powder |
| 8 . | Cold powder |
| 9 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Butyrate 572A1V95316 Smoke, Trsp | Eastman Chemical Company | CAB | Tenite™ Butyrate |
| Thermoset Plastics 300 No.65 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Etinox® ER-C130 | Ercros, S.A. | PVC, Rigid | Etinox® |
| Dialon 1015GF20 | DTR S.r.l. (Develop Thermoplastic Resins) | PC | Dialon |
| Hyundai EP PA66 LD130 | HYUNDAI EP Co., Ltd. | Nylon 66 | Hyundai EP PA66 |
