Order Products : sales@su-jiao.com
Formolene® 2575N
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rggw0a_Formolene2575N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 2575N is a very high melt flow, medium impact copolymer polypropylene. It is designed for such applications as Housewares, packaging and consumer goods requiring good impact strength especially in cold temperatures. It is characterized by easy mold flow, excellent physical property balance and finished product dimensional stability. Formolene® 2575N meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 75 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 21.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 130 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 97.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Colorite G Series 9011G-015 | Colorite Polymers | PVC, Flexible | Colorite G Series |
| Geon™ Vinyl Rigid Extrusion LR840 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Sumiliteresin® PR-50869 I | SBHPP | Phenolic | Sumiliteresin® |
| OTECH PVC OW740 - Cord Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| LEXAN™ ML7667 resin | SABIC Innovative Plastics | PC | LEXAN™ |
