Order Products : sales@su-jiao.com
Halar® 6014
| Category: | ECTFE , Ethylene Chlorotrifluoroethylene Copolymer |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Halar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | reWLf6_Halar-6014.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Halar®The 6014 is transparent semi-crystalline fluorine-containing resin, which can be melt processed. It is specially used for anti-static powder coating, especially recommended as topcoat for protective and anti-corrosion products. Halar®6014 has good chemical, electrical and thermal properties. Especially pure, easy to process, and has ideal permeability resistance and flame retardancy. In addition, Halar®6014 coatings have excellent surface finish and hardness. Halar®The main features of the 6014 include:
-ideal permeability resistance
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.68 | g/cm³ | ASTM D3275 |
| Melt Mass-Flow Rate (MFR) (275°C/2.16 kg) | 12 | g/10 min | ASTM D3275 |
| Average Particle Size 1 | 80 | µm | ASTM D1921 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 225 | °C | ASTM D3275 |
| Additional Information |
|---|
| 加工 Halar® 6014 旨在作为面漆材料，施加到底漆涂层基材上。可以采用常规抗静电粉末涂层技术。一般会采用几道工序，包括基材准备、喷涂、烘烤和冷却。根据用途的不同，会采用进一步的工序。可能会需要重复几遍，以获得所需的Halar®用量及涂层厚度。 Halar® 6014可以单独使用，不需要进一步配混。基材准备、喷枪参数如电压和烘箱温度及时间都必须控制好，以获得无瑕疵涂层产品。 储存和操作 如果在室温下放置在干净干燥的环境，Halar® 可熔融加工含氟聚合物树脂就无需担心保质期问题。打开的容器必须再次密封好，以防止污染。 安全性和毒理学-使用Halar®可熔融加工含氟聚合物树脂前，应参阅产品的材料安全数据表单，遵循所有的标签说明和操作注意事项。-和所有含氟聚合物材料一样，操作和加工必须在通风良好的场所进行，设备上方应安装蒸汽抽气装置。不能吸入烟雾，应避免接触皮肤和眼睛。如有皮肤接触，用肥皂和水清洗干净。如触及眼睛，应立即用大量清水冲洗，并寻求医疗帮助。不要在粉尘、蒸汽或烟雾污染的环境吸烟。-废物处置详细建议请参考材料安全数据表单。包装 Halar® 6014用一次性桶包装，每桶25公斤。每只桶内有两只聚乙烯树脂衬袋。 |
| Note Message | |
|---|---|
| 1 . | Method C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2900-70 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Devlon ABS | Devol® Engineering Polymers | ABS | Devlon |
| InnoPlus LD2420T | PTT Global Chemical Public Company Limited | LDPE | InnoPlus |
| Polifor® E 12 TR/10 UV GRIGIO 7442 | SO.F.TER. SPA | PP, Unspecified | Polifor® |
| EvoSource™ ABS 4136 70/05 | MBA Polymers Austria Kunststoffverarbeitung GmbH | ABS | EvoSource™ |
