Order Products : sales@su-jiao.com

Mold Max® 25

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	Mold Max®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	raiZsd_Mold-Max-25.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature. Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin). Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

Message

Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.

Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin).

Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

General Information
Uses	Modeling Material Prototyping
Appearance	Purple
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.18	g/cm³	ASTM D1475
Specific Volume	0.849	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	100A:5B by weight
Operating Temperature	-54 to 204	°C

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	0.10	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	25		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.552	MPa	ASTM D412
Tensile Strength (Break)	3.98	MPa	ASTM D412
Tensile Elongation (Break)	380	%	ASTM D412
Tear Strength ¹	22.8	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life	60	min
Thermoset Mix Viscosity	25000	cP	ASTM D2393
Demold Time	1400	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Rilsan® HT CZM 30 BLACK TLD	Arkema	PPA	Rilsan® HT
Yanshan PE 1600J	SINOPEC Beijing Yanshan Petrochemical	HDPE	Yanshan PE
Hanwha Total PE E153A	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	EVA	Hanwha Total PE
Honeywell PCTFE P7500HS	Honeywell	PCTFE	Honeywell PCTFE
SABIC® PPcompound 19T1040	Saudi Basic Industries Corporation (SABIC)	PP, Unspecified	SABIC® PPcompound